-
Products
Servo Balancing Hoists Read more
Server Lifter Read more
Vacuum Tube Lifters Read more
FULLSHARP Manipulators Read more
Pneumatic Jib Cranes Read more
Standard Structures Read more
FULLSHARP Rail Systems Read more
Lifts All Read more
Vacuum Lifting Pads Read more
Smart Electric Lifters (Taiwan) Read more
Smart Electric Lifters (China) Read more
Mini Cranes Read more
Air balancer Read more
Knight Global Servo Hoists Read more
Knight Global Manipulators Read more
Knight Global Rails Read more
Custom-designed lifters Read more
Electric Tow Tractors Read more
Plastic-Coated Steel Pipes Read more
Hoists Read more
Other Knight Global Products Read more
All products Servo Balancing Hoists Server Lifter Vacuum Tube Lifters FULLSHARP Manipulators Pneumatic Jib Cranes Standard Structures FULLSHARP Rail Systems Lifts All Lifts All Baggage Handling Lifts All by Industry Lifts All Cranes Lifts All Pneumatic Hoists Lifts All Custom Lifting Tools Lifts All Standard Grippers Vacuum Lifting Pads Metal sheet lifting Glass panel lifting for installation Glass panel lifting for production Smart Electric Lifters (Taiwan) Smart Electric Lifters (China) Mini Cranes Semi-automatic mini cranes 400-500-1000kg Automatic mini cranes 1000-2000kg Air balancer Knight Global Servo Hoists Knight Global Manipulators Knight Global Rails Custom-designed lifters Electric Tow Tractors Plastic-Coated Steel Pipes Hoists COMEUP Electric Hoists ENDO Air Hoists KITO Electric Hoists Other Knight Global Products - What do you need to lift
- Contact
Equipment › ANVER vacuum lifters › Battery powered vacuum lifters › BAE3-GEN3 vacuum generator
ANVER BAE3-GEN3 battery vacuum generator with safety lock-out
The BAE3-GEN3 series is a 12 V DC battery powered Vac-Pack for non-porous loads where AC power is not readily available, with vacuum control module, safety lock-out and leak warning.
Vacuum generators and vacuum stations
Self-contained battery powered vacuum stations
BAE3-GEN3 series with ANVER vacuum control module & safety lock-out
Manufacturer PDF
ANVER’s BAE3-GEN3 series Vac-Pack vacuum generator contains many of the same features as the standard VPE3-GEN3 series. Designed for use with a wide assortment of vacuum pad attachments and lifter assemblies, these high quality Vac-Packs are ruggedly designed for heavy production use. Units are available with heavy duty frames or for mounting remotely. The BAE3-GEN3 series includes a rechargeable, heavy duty 12 volt DC 105 Amp hour battery, making it suitable for handling non-porous loads. It is commonly used for special applications where AC power is not readily available.
Safety features:
- Load sensing lifting bail with safety lock-out
Pendant controls are only active when the lifter is lowered completely and there is no load on the bail. This eliminates the risk of accidental release of a suspended load by the operator. (Feature not present on the BAE3-GEN3-RD series, which is a standalone version, or the BAE3-GEN3-T, which is a tilter version.) - Vacuum control
A solid-state vacuum control combines all the required vacuum generator controls in one rugged unit. It controls all vacuum pump functions and safety lights, and is fitted with a standard audible vacuum leakage warning system. - Energy saver technology
A vacuum-controlled valve shuts off the vacuum pump when the pre-set vacuum level is reached, reducing wear and tear on the pump.
- Audible vacuum leakage warning system
Integrated electronically controlled vacuum leakage sensor monitors vacuum level and will sound an alarm if a slow vacuum leak is present when the vacuum level drops to a pre-determined set point. - Vacuum retention
The system includes an internal check valve to stop leakage of vacuum in the event of a power failure (non-porous loads). A 5.4 gallon (1247 cu. in.) vacuum reservoir assists in maintaining a safe vacuum level during a power failure (non-porous loads).
Additional features:
- Front control panel and gauges
All gauges, lights, and power switches are mounted on the front of the control panel. The two vacuum gauges on the face of the panel display the level of vacuum in the manifold and in the reservoir. - Indicator lights – front, left & right side
Green light indicates “safe” vacuum level.
Red light indicates “unsafe” vacuum level.
White light indicates “power on.” - Battery charger (CHARGER-BAE) (sold separately)
The battery charger is designed specifically for today’s high performance, deep-cycle lead-acid batteries. The straight blade plug accommodates a standard extension cord using a 110V AC wall outlet.
Generator shown with ESC controls
Your choice of four control styles to suit your application:
Electric self-cycling attach/release
Instant attach/release is provided via the hoist up and down movement. The attach and release alternate each lift cycle for fast, efficient handling. Similar to our line of mechanical generators. .
Features:
- No pendant or radio controls required for attach/release.
- Extremely safe: load cannot be released until it is set down on a surface.
- Simple to operate.
Radio controlled 3 button attach / release / interlock transmitter with plug-in receiver
Hand held device with attach, release and safety interlock push buttons, with holster mounted on the front handlebar. Plug-in receiver is mounted on the side of the vacuum generator.
Includes:
- Radio control transmitter and mounting holster
- Radio control receiver and mounting bracket
Plug-in attach / release / interlock control pendant
Attach/release momentary switch and safety interlock push-button located on control pendant with 10 ft long coiled cord.
Includes:
- Pendant control and mounting holster
- Plug-in, replaceable coil cord, 10 ft. long.
Plug-in harness, customer radio receiver interface
Control harness allows you to wire your own radio receiver for integration of attach / release / interlock.
Includes:
- Cord, 3 ft. long.
- Ergonomic control handlebar
Easy to grasp, large loop handlebar enables the operator to easily and safely maneuver the attached load without touching the load itself. Handlebar can be adjusted for smaller size loads. - Twist-lock power cord connector
The twist-lock receptacle prevents accidental disconnection from the power source. Both male and female halves are supplied.
Maintenance:
- Front & rear panel cover
The front and rear covers pivot open for easy access to all components. - Air filter
Over-sized air filter provided inside the front cover features a screw-on clear filter bowl for easy filter inspection and cleaning. - Removable battery case cover
Standard battery case with strap and cover provides easy access to the battery, which is mounted on a rugged mounting bracket(s) bolted directly to the Vac-Pack. - Battery cable plugs
Allows easy connection and disconnection to and from the Vac-Pack during battery maintenance or replacement.
Vacuum pump(s):
- The (3) diaphragm type vacuum pumps at 7.5 CFM total are driven by 1/16 h.p. 12 volt D.C. motor and generate 24” Hg. (at sea level) of vacuum. The ANVER vacuum control module maintains a safe vacuum level by cycling the vacuum pump motor on or off as required, which extends both vacuum pump life and battery charge.
Battery specification:
- 79 Amp hour, deep-cycle battery can provide up to 8 hours of continual operation in many applications.
Options:
- Optional moisture traps (WT-VP3-[series])
For damp applications: prevents saturation of the filter and possible damage to the pump. Not for handling wet loads. Mounts on vacuum manifold. - *Optional generator configurations and voltages available:
In reference to our standard line of Vac-Packs noted above, other configurations, voltages and set-ups are available. Contact us for further information and application requirements.
Specifications for lifting frames and pad attachments:
| Generator series model no. | BAE3-GEN3-L | BAE3-GEN3-S | BAE3-GEN3-H | BAE3-GEN3-HD | BAE3-GEN3-X |
| Rated load capacity [lbs (kg)] | 2300 (1043) | 6900 (3129) | 7000 (3175) | 10000 (4535) | 10000 (4535) |
| Unit weight [lbs (kg)] | 474 (215) | 474 (215) | 474 (215) | 474 (215) | 474 (215) |
| A Max. headroom [in. (mm)] | 30.13 (765) | 31.5 (800) | 31.5 (800) | 31.5 (800) | 28 (711) |
| B Handlebar height [in. (mm)] | 12.44 (316) | 13.81 (351) | 13.81 (351) | 13.81 (351) | 12.31 (313) |
| C Unit width [in. (mm)] | 25.38 (645) | 26.13 (664) | 26.13 (664) | 26.13 (664) | 26.13 (664) |
| D Maximum handlebar length [in. (mm)] | 34 (864) | 34 (864) | 34 (864) | 34 (864) | 34 (864) |
| E Hardware centers [in. (mm)] | 9 (229) | 22.38 (568) | 22.38 (568) | 23.38 (594) | 23.38 (594) |
| F Fits tube size [in. (mm)] | 3 x 3 (76 x 76) | 3 x 6 (76 x 152) | 5 x 7 (127 x 178) | 5 x 7 (127 x 178) | 8 x 6 (203 x 152) |
| G Vac-Pack depth [in. (mm)] | 18.84 (479) | 18.84 (479) | 18.84 (479) | 18.84 (479) | 18.84 (479) |
| H Hardware spacing [in. (mm)] | N/A | N/A | N/A | N/A | 4 (102) |
| (3) Total pump capacity SCFM | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 |
| Vacuum level at sea level [in. Hg] | 24 | 24 | 24 | 24 | 24 |
| Energy saver / quiet automatic shut-off | YES | YES | YES | YES | YES |
| Battery part number | AGM-12V-75 | AGM-12V-75 | AGM-12V-75 | AGM-12V-75 | AGM-12V-75 |
Specifications for remote mounting:
| Generator series model no. | BAE3-GEN3-R |
| Unit weight [lbs (kg)] | 270 (123) |
| A Max. headroom [in. (mm)] | 23.63 (600) |
| B Unit width [in. (mm)] | 29.31 (744) |
| C Unit depth [in. (mm)] | 25.38 (645) |
| Vacuum level at sea level [in. Hg] | 24 |
| Energy saver / quiet automatic shut-off | YES |
| Battery part number | AGM-12V-75 |
| Operator control style options | Radio control or pendant control (electric self-cycling not compatible with this model) |
Specifications for tilters:
| Generator series model no. | BAE3-GEN3-T | ||
| Unit weight [lbs (kg)] | 270 (123) | ||
| A Max. headroom [in. (mm)] | 22.44 (569) | ||
| B Unit width [in. (mm)] | 18.88 (479) | ||
| C Unit depth [in. (mm)] | 25.38 (645) | ||
| Hardware mounting pattern | D x F | G Thread: (4) M20x2.5 | 12 x 8 (305 x 203) |
| E x F | H Thread: (4) M10x1.5 | 14 x 8 (356 x 203) | |
| Vacuum level at sea level [in. Hg] | 24 | ||
| Energy saver / quiet automatic shut-off | YES | ||
| Battery part number | AGM-12V-75 | ||
| Operator control style options | Radio control or pendant control (electric self-cycling not compatible with this model) | ||
| Optional controls | ||
| Product photo | Part number | Description |
| RCPK-ARI | Radio control kit for Vac-Packs, attach/release/interlock Kit includes:
| |
| EPK-AC/DC-ARI | Pendant control kit for Vac-Packs, attach/release/interlock Kit includes:
| |
| 34000332 | Plug-in harness, customer radio receiver interface Kit includes:
| |
| Battery charger and accessories | |||
| Product photo | Part number | Description | Item weight lb (kg) |
| CHARGER-BAE | Battery charger, smart charge (12 VDC) w/ adapter harness Includes:
| 3.72 (1.69) | |
| Recommended spare parts | |||
| Product photo | Part number | Description | Item weight lb (kg) |
| RCT-PCLIP | Plastic belt clip for RCT transmitter | 0.441 (12.5) | |
| RCT-MCLIP | Metal belt clip for RCT transmitter | 0.758 (21.5) | |
| RCT-SCREW | Belt clip screw for RCT transmitter | 0.0004 (0.01) | |
| RCT-NYLONCOVER | Protective nylon cover for RCT transmitter | 1.111 (31.5) | |
13600254
Related pages
Need an ANVER system for your load?
Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.