VN EN TW
FullSharp
Vietnam+84 332 839 268Taiwan+886 3 451 8806Send requestreply in 24 h
About
Equipment
What do you need to lift
Completed projects
Catalogue
Contact
VNENTW
FullSharp · since 1991

Equipment › ANVER vacuum lifters › Battery powered vacuum lifters › BAE1-GEN3 vacuum generator

ANVER BAE1-GEN3 battery vacuum generator, up to 4600 lb

The BAE1-GEN3 is a battery powered vacuum generator for sites without AC power, with a vacuum control module and safety lock-out. Features, control styles, specifications, remote versions and parts below.

Request a quote

Vacuum generators and vacuum stations
Self-contained battery powered vacuum stations
BAE1-GEN3 series with ANVER vacuum control module & safety lock-out
Manufacturer PDF

ANVER’s BAE1-GEN3 series Vac-Pack vacuum generator contains many of the same features as the standard VPE1-GEN3 series. Designed for use with a wide assortment of vacuum pad attachments and lifter assemblies, the BAE1-GEN3 series includes a rechargeable, heavy duty 12 volt DC 79 amp hour battery, making it suitable for handling non-porous loads. It is commonly used for special applications where AC power is not readily available.

Safety features:

  • Load sensing lifting bail with safety lock-out
    Pendant controls are only active when the lifter is lowered completely and there is no load on the bail. This eliminates the risk of accidental release of a suspended load by the operator. (Feature not present on the BAE1-GEN3-RD Series, which is a standalone version, or the BAE1-GEN3-T, which is a tilter version.)
  • Vacuum control
    A solid-state vacuum control combines all the required vacuum generator controls in one rugged unit. It controls all vacuum pump functions and safety lights, and is fitted with a standard audible vacuum leakage warning system.
  • Energy saver technology
    A vacuum-controlled valve shuts off the vacuum pump when the pre-set vacuum level is reached, reducing wear and tear on the pump.

ANVER Air Saver tag

  • Audible vacuum leakage warning system
    Integrated electronically controlled vacuum leakage sensor monitors vacuum level and will sound an alarm if a slow vacuum leak is present when the vacuum level drops to a pre-determined set point.
  • Vacuum retention
    The system includes an internal check valve to stop leakage of vacuum in the event of a power failure (non-porous loads). A 627 cu. in. vacuum reservoir assists in maintaining a safe vacuum level during a power failure (non-porous loads).

Additional features:

  • Front control panel and gauges
    All gauges, lights and power switches are mounted on the front of the control panel. The two vacuum gauges on the face of the panel display the level of vacuum in the manifold and in the reservoir.
  • Indicator lights
    Green light indicates “safe” vacuum level.
    Red light indicates “unsafe” vacuum level.
    White light indicates “power on.”

ANVER BAE1-GEN3 battery powered vacuum generator

Generator shown with radio controls

Your choice of four control styles to suit your application:

Standard controls
Electric self-cycling system
Electric self-cycling video

Electric self-cycling attach/release
Instant attach/release is provided via the hoist up and down movement. The attach and release alternate each lift cycle for fast, efficient handling. Similar to our line of mechanical generators.

Features:

  • No pendant or radio controls required for attach/release.
  • Extremely safe: load cannot be released until it is set down on a surface.
  • Simple to operate.
Optional controls
RCT 3 button radio control transmitter

Radio controlled 3 button attach / release / interlock transmitter with plug-in receiver
Hand held device with attach, release and safety interlock push buttons with holster mounted on front handlebar. Plug-in receiver is mounted on side of vacuum generator.

Includes:

  • Radio control transmitter and mounting holster
  • Radio control receiver and mounting bracket
EPK-AC/DC-ARI control pendant

Plug-in attach / release / interlock control pendant
Attach/release momentary switch and safety interlock push-button located on control pendant with 10 ft long coiled cord.

Includes:

  • Pendant control and mounting holster
  • Plug-in, replaceable coil cord, 10 ft. long.
34000332 radio receiver interface harness

Plug-in harness, customer radio receiver interface
Control harness allows you to wire your own radio receiver for integration of attach / release / interlock.

Includes:

  • Cord, 3 ft. long.

  • Recommended battery charger (CHARGER-BAE) (sold separately)
    The battery charger is designed specifically for today’s high performance, deep-cycle lead-acid batteries. The straight blade plug accommodates a standard extension cord using a 110V AC wall outlet.
  • Ergonomic control handlebar
    Easy to grasp, large loop handlebar enables the operator to easily and safely maneuver the attached load without touching the load itself. Handlebar can be adjusted for smaller size loads.

Maintenance:

  • Bottom hinged front & rear panel cover
    The front and back covers fold open for easy access to all components.
  • Air filter
    Over-sized air filter provided inside of front cover features a screw-on clear filter bowl for easy filter inspection and cleaning.
  • Removable battery case cover
    Standard battery case with strap and cover provides easy access to the battery, which is mounted on a rugged mounting bracket(s) bolted directly to the Vac-Pack.
  • Battery cable plugs
    Allows easy connection and disconnection to and from the Vac-Pack during battery maintenance or replacement.

Vacuum pump:

  • The dual 2.5 CFM diaphragm vacuum pumps are driven by a 1/16 hp 12 volt DC motor and generate 24” Hg (at sea level) of vacuum. The ANVER vacuum control module maintains a safe vacuum level by cycling the vacuum pump/motor on or off as required, which extends both the vacuum pump life and the battery charge.

Battery specification:

  • 79 amp hour, deep-cycle battery can provide up to 8 hours of continual operation in many applications.

Options:

  • Optional moisture traps (32000216)
    For damp applications: prevents saturation of filter and possible damage to pump. Not for handling wet loads. Mounts on vacuum manifold.
  • *Optional generator configurations available:
    In addition to our standard line of Vac-Packs noted above, other configurations and set-ups are available.

Specifications for lifting frames and pad attachments:

BAE1-GEN3 dimension drawingLifting bail dimensions
Generator series model no.BAE1-GEN3-FDBAE1-GEN3-HDBAE1-GEN3-XDBAE1-GEN3-XDH
Rated load capacity [lbs (kg)]2200 (998)4600 (2087)4600 (2087)4600 (2087)
Unit weight [lbs (kg)]260 (118)264 (120)270 (122)278 (126)
A Max. headroom [in. (mm)]25.19 (640)27.19 (691)28.19 (716)28.19 (716)
B Handlebar height [in. (mm)]12 (304)14 (356)15 (381)15 (381)
C Handlebar width [in. (mm)]18.75 (476)18.75 (476)18.75 (476)18.75 (476)
D Maximum handlebar length [in. (mm)]33.5 (851)33.5 (851)33.5 (851)33.5 (851)
E Hardware centers [in. (mm)]9 (229)12 (305)12 (305)12 (305)
F Fits tube size [in. (mm)]3 x 3 (76 x 76)3 x 6 (76 x 152)5 x 7 (127 x 178)5 x 7 (127 x 178)
G Vac-Pack depth [in. (mm)]17.88 (454)17.88 (454)17.88 (454)17.88 (454)
Vacuum pump [HP]1/161/161/161/16
Pump capacity [SCFM]2x 2.52x 2.52x 2.52x 2.5
Vacuum level at sea level [in. Hg]24242424
Energy saver / quiet automatic shut-offYesYesYesYes
Battery part numberAGM-12V-75AGM-12V-75AGM-12V-75AGM-12V-75

Specifications for remote mounting:

BAE1-GEN3-RD/TD remote mounting dimension drawing
Generator series model no.BAE1-GEN3-RD (remote generator) [battery mounted on generator]BAE1-GEN3-TD (tilters / rotators only) [battery mounted on lifter]
Unit weight [lbs (kg)]256 (116)256 (116)
A Max. headroom [in. (mm)]20.88 (530)19.94 (506)
B Unit depth [in. (mm)]27.31 (694)27.31 (694)
C Unit width [in. (mm)]14.63 (372)14.63 (372)
D x E x G Hardware mounting pattern [in. (mm) thread size]12 x 12 (305 x 305) M20X2.512 x 12 (305 x 305) M20X2.5
D x F x H Hardware mounting pattern [in. (mm) thread size]12 x 6 (305 x 152) M8X1.2512 x 6 (305 x 152) M8X1.25
Vacuum pump [HP]1/161/16
Pump capacity [SCFM]2x 2.52x 2.5
Vacuum level at sea level [in. Hg]2424
Energy saver / quiet automatic shut-offYesYes
Battery part numberAGM-12V-75AGM-12V-75
Operator control style optionsRadio control or pendant control (electric self-cycling not compatible with this model)Radio control or pendant control (electric self-cycling not compatible with this model)
Optional controls
Product photoPart numberDescription
RCT 3 button radio control transmitterRCPK-ARI

Radio control kit for Vac-Packs, attach/release/interlock

Kit includes:

  • Radio control transmitter and mounting holster
  • Radio control receiver and mounting bracket
EPK-AC/DC-ARI control pendantEPK-AC/DC-ARI

Pendant control kit for Vac-Packs, attach/release/interlock

Kit includes:

  • Pendant control and mounting holster
  • Plug-in, replaceable coil cord, 10 ft. long.
34000332 radio receiver interface harness34000332

Plug-in harness, customer radio receiver interface

Kit includes:

  • Cord, 3 ft. long.
Battery charger and accessories
Product photoPart numberDescription
Smart battery chargerCHARGER-BAE

Battery charger, smart charge (12 VDC) w/ adapter harness

Includes:

  • Battery charger/maintainer
  • Harness, battery charger, modified connector
Recommended spare parts
Product photoPart number DescriptionItem weight oz. (grams)
RCT-PCLIP plastic belt clipRCT-PCLIPPlastic belt clip for RCT transmitter0.441
(12.5)
RCT-MCLIP metal belt clipRCT-MCLIPMetal belt clip for RCT transmitter0.758
(21.5)
RCT-SCREW belt clip screwRCT-SCREWBelt clip screw for RCT transmitter0.0004
(0.01)
RCT-NYLONCOVER nylon coverRCT-NYLONCOVERProtective nylon cover for RCT transmitter1.111
(31.5)

13600253

Related pages

GF10T 10 ton lifting frameGF15T 15 ton lifting frameGF5T 5 ton lifting frame

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

Contact us