300 kg Vacuum Lifting of Sheet, Glass and Stone

FullSharp offers a 300 kg mechanical vacuum lifter that builds suction with a few strokes of a hand pump to grip glass, stone, metal sheets and other flat panels. It needs no electricity and no compressed air, so it works at outdoor sites and in warehouses where there is no power outlet or air line near the lifting point.

Outdoor sites and warehouses often have no power outlet or compressed air line right where lifting is needed. Glass, stone, and metal sheets are slippery and heavy, so carrying them by hand risks slipping and cracked edges.

FullSharp offers a mechanical vacuum lifter rated at 300 kg, where a few strokes of the hand pump build enough suction to grip the panel. The unit needs no electricity and no compressed air, so it works wherever you bring it.

300kg Mechanical Vacuum Lifter, No Electricity or Compressed Air Needed

A 300 kg mechanical vacuum lifter with suction cups and a vacuum gauge.

Equipment installed

Rubber suction cups: soft edges that seal against the surface, gripping glass, stone, metal sheet, and flat wood panels.
Hand pump for vacuum generation: a few strokes evacuate the chamber, with no electricity or compressed air required.
Vacuum gauge: a needle showing suction level, with a warning zone prompting a re-pump before lifting.
Handle frame and lifting hook: carried by two people or hooked to a hoist or crane depending on the panel's weight.

Key specifications

Load capacity300 kg
Power sourceNo electricity, no compressed air needed
Materials handledMetal sheet, glass, stone, wood

Benefits for the workshop

Works anywhere

Independent of power outlets or an air compressor, so it works at outdoor sites and warehouses alike.

Controlled grip

The vacuum gauge shows exactly when to re-pump, so users never have to guess.

Simple maintenance

Few components, mainly cleaning the suction cups and replacing worn seals to keep it running.

Actual installation photos

300kg Mechanical Vacuum Lifter, No Electricity or Compressed Air Needed - photo 1

300kg Mechanical Vacuum Lifter, No Electricity or Compressed Air Needed - photo 2

300kg Mechanical Vacuum Lifter, No Electricity or Compressed Air Needed - photo 3

300kg Mechanical Vacuum Lifter, No Electricity or Compressed Air Needed - photo 4

Click a photo to enlarge. Album of 4 photos taken on site.

Suitable applications

Installing glass panels and glass walls on site
Stone and large-format tile workshops moving panels
Metal sheet warehouses picking sheets from a stack
Loading and unloading engineered wood panels in furniture workshops

Frequently asked questions

How does a hand pump vacuum lifter work?

A few strokes of the hand pump draw air out of the rubber suction cups so they seal against the panel. A vacuum gauge shows the level, and the lifter is then hung from a hoist or crane to lift.

What materials can a mechanical vacuum lifter pick up?

Flat, fairly smooth surfaces such as glass, stone, metal sheet and similar panels. Very porous or rough surfaces may not seal, so FullSharp checks the material first.

Can I use a vacuum lifter where there is no electricity?

Yes. This lifter creates suction mechanically, so it works on job sites, outdoors or on upper floors where there is no power or compressed air supply.

Similar projects

Consultation for your workshop

FullSharp asks about the material type, surface texture, and curvature of the panel, since the surface determines actual grip strength. Our engineers weigh your heaviest panel and select the number of suction cups and mounting method. Send us the panel specifications and your current process, and we will recommend the right vacuum lifter.

300 kg Mechanical Vacuum Lifter with Hand Pump for Glass, Stone and Metal Sheets, No Power Needed