VN EN TW
FullSharp
Vietnam+84 332 839 268Taiwan+886 3 451 8806Send requestreply in 24 h
About
Equipment
What do you need to lift
Completed projects
Catalogue
Contact
VNENTW
FullSharp · since 1991

FullSharp installed a 200 kg pneumatic jib crane on a mobile base with a server hook tool, so heavy servers can be loaded into rack cabinets without two or three people lifting at shoulder height. The pneumatic lift moves without jerking, and the tool holds the server level at slot height so it slides straight onto the cabinet rails.

Loading a server into a rack cabinet takes two or three people lifting and balancing it at shoulder height together. The equipment is heavy and expensive, and just a slight bump or vibration against the rack frame can damage the components inside. The rows of cabinets also sit apart, so a fixed piece of equipment cannot be installed.

FullSharp installed a pneumatic jib crane rated 200 kg on a mobile base, which can be pushed between rows of rack cabinets. The pneumatic mechanism lifts and lowers smoothly with no jerking, so the equipment stays almost vibration-free. The server hook tool holds the equipment in the correct position so it can be slid straight into the cabinet rails without anyone supporting it by hand.

200 kg Pneumatic Jib Crane with Server Hook Tool, Mobile Base

200 kg pneumatic jib crane on a mobile base with a server hook tool, used to load equipment into a rack cabinet.

Equipment Installed

  • Mobile base: a wheeled base frame that lets the whole assembly be pushed between rows of rack cabinets without needing to be fixed to the floor.
  • Pneumatic jib crane: lifts and lowers with compressed air, moving smoothly and stopping exactly at the cabinet slot height.
  • Server hook tool: a support surface that holds the equipment level in the correct position, sliding it straight into the cabinet rails.
  • Fine height-adjustment mechanism: aligns the height between the tool and the cabinet slot before sliding the equipment in.
  • Lockable wheels: lock in place during operation so the whole assembly stays still and does not shift while pushing the server in.

Key Specifications

  • Lifting load200 kg
  • Drive typePneumatic

Benefits for Your Facility

Moves Between Rows of Racks

The mobile base lets one unit serve multiple rows of cabinets, with no need to install one fixed in place.

Vibration-Free Lifting

The pneumatic mechanism runs smoothly, protecting the sensitive electronics inside the equipment.

One Person Can Install It

The tool holds the equipment in the correct position, so no group of people is needed to support it at shoulder height.

Actual Installation Photos

200 kg Pneumatic Jib Crane with Server Hook Tool, Mobile Base - photo 1 200 kg Pneumatic Jib Crane with Server Hook Tool, Mobile Base - photo 2 200 kg Pneumatic Jib Crane with Server Hook Tool, Mobile Base - photo 3 200 kg Pneumatic Jib Crane with Server Hook Tool, Mobile Base - photo 4 200 kg Pneumatic Jib Crane with Server Hook Tool, Mobile Base - photo 5 200 kg Pneumatic Jib Crane with Server Hook Tool, Mobile Base - photo 6 200 kg Pneumatic Jib Crane with Server Hook Tool, Mobile Base - photo 7 200 kg Pneumatic Jib Crane with Server Hook Tool, Mobile Base - photo 8 200 kg Pneumatic Jib Crane with Server Hook Tool, Mobile Base - photo 9 200 kg Pneumatic Jib Crane with Server Hook Tool, Mobile Base - photo 10 200 kg Pneumatic Jib Crane with Server Hook Tool, Mobile Base - photo 11 200 kg Pneumatic Jib Crane with Server Hook Tool, Mobile Base - photo 12 200 kg Pneumatic Jib Crane with Server Hook Tool, Mobile Base - photo 13

Click a photo to enlarge. Album of 13 photos taken on site.

Suitable Applications

  • Data centers and server rooms
  • Installing and servicing rack-mounted equipment
  • IT equipment warehouses
  • Areas for testing and configuring equipment before installation

Related Products and Projects

Frequently asked questions

How do you install heavy servers into a rack safely?

Use a lifting device that holds the server level at the slot height. Here a pneumatic jib crane with a server hook tool lifts it smoothly and the server slides straight onto the rails without anyone holding it.

Why use pneumatic lifting for servers?

Compressed air gives smooth, jerk-free motion, so the equipment stays almost vibration-free. A fine height adjustment then lines the tool up with the slot.

Can one unit serve several rows of racks?

Yes. The mobile base is pushed between rows, and lockable wheels hold it still while the server is pushed in. Fixed equipment could not be installed because the cabinet rows sit apart.

Similar projects

Installation Consultation for Your Facility

FullSharp measures the distance between rows of racks, the height of the mounting slot and the heaviest equipment weight to select the right base and tool size. Our engineers check the floor surface and the compressed air supply in the area. Contact FullSharp to schedule a survey.

Contact Us for a Survey and QuoteView Completed Projects