FS-DF

  • Safe working load1,500–3,000 kg
  • PowerAC 208–460 V (±10%)
  • Suction cups16–30 × Φ300
  • TiltElectric 0–90°, worm gear drive
  • ControlWireless remote
  • Frame6250×1750 to (3125+6000+3125)×1750 mm

FS-DF electric tilt vacuum lifter for large glass sheets

FS-DF is an electric tilt vacuum lifter series for glass processing plants. Safe working load ranges from 1,500 to 3,000 kg, powered from AC 208–460 V (±10%) mains.

It is built for lifting large and extra-large glass sheets inside the factory. A high-precision worm gear drive tilts the glass electrically from 0 to 90°. The high-flow vacuum pump from an international brand gives fast suction and a high vacuum level. Operation is simple and convenient, and the AC supply suits long periods of uninterrupted work.

FS-DF vacuum lifter holding a large glass sheet in the plant

Features

1

For large and extra-large glass sheets

Designed for lifting large and extra-large glass sheets in the factory. Frame length runs from 6,250 mm to (3125+6000+3125) mm depending on the model.

2

0–90° electric tilt by worm gear

A high-precision worm gear drive tilts the glass electrically from 0 to 90°.

3

High-flow vacuum pump

International-brand pump with high flow, fast suction and a high vacuum level.

4

Simple operation

Wireless remote control, simple and convenient to operate.

5

AC powered for continuous work

AC 208–460 V (±10%) mains supply, suited to long periods of uninterrupted operation.

Specifications

ModelSafe working loadSize (mm)Cup diameter (mm)Number of cupsPowerControlFunction
FS-DF1500-16S1,500 kg6250×1750Φ30016 pcsAC 208–460 V (±10%)Wireless remote0–90° electric tilt
FS-DF2000-20S2,000 kg(2125+6000+2125)×1750Φ30020 pcsAC 208–460 V (±10%)Wireless remote0–90° electric tilt
FS-DF3000-30S3,000 kg(3125+6000+3125)×1750Φ30030 pcsAC 208–460 V (±10%)Wireless remote0–90° electric tilt

All three models share Φ300 cups, AC 208–460 V (±10%) power, wireless remote control and 0–90° electric tilt; they differ in frame length, number of cups and safe working load.

Main components

1

Vacuum pump

Low energy consumption / High vacuum level, strong suction / International brand, runs continuously for 24 hours with more stable performance

Vacuum pump
2

Vacuum suction cup

300 mm rubber diameter, nitrile rubber / Three-ring multi-cavity seal for good pressure holding and higher safety

Vacuum suction cup
FS-DF
3

Equipment frame

Custom-built at the factory / National-standard structural steel sections / Welded, machined and formed, baked-paint surface, durable

Equipment frame
4

Other parts

International-brand power switches, high-quality brushless motors, etc. / UL and other international certifications / Low failure rate, durable

Other parts

Parts diagram

Parts diagram FS-DF

Numbers on the diagram match the part names below.

  1. Lifting ring
  2. Battery control box
  3. Vacuum system
  4. Vacuum suction cup
  5. Main frame
  6. Vacuum hose
  7. Rotation brushless motor
  8. Rotation speed reducer
  9. Rotation gear set
  10. Tilt gear set
  11. Tilt reducer
  12. Tilt brushless motor
  13. Remote receiver
  14. Power switch
  15. Electric drive system
  16. Vacuum indicator lamp
  17. Alarm lamp
  18. Power indicator
  19. Vacuum pressure sensor

On-site photos

Picking up an insulated glass unit lying flat
Picking up an insulated glass unit lying flat
Tilting a large sheet to an inclined position
Tilting a large sheet to an inclined position
Holding an insulated glass unit in the air while tilting
Holding an insulated glass unit in the air while tilting
Sheet tilted fully upright at 90°
Sheet tilted fully upright at 90°
Placing a long glass sheet into a crate, two workers guiding
Placing a long glass sheet into a crate, two workers guiding
Tilt and rotation motor units on the lifter
Tilt and rotation motor units on the lifter