Quick answer: The FS-GVLR400 is an electric glass vacuum lifter cart FullSharp will soon offer: four Ø300 mm pads, 400 kg at 0.88 m reach and 230 kg at 1.43 m, up to 3.38 m high. The pad frame flips 0–180°, rotates 360° and shifts ±50 mm by motor. Two 12V 115Ah batteries run 12–18 hours; with the head removed it folds to 1,249 x 815 x 1,349 mm for elevators.

Why an electric glass lifter cart

Installing 200–400 kg glass panes on site usually runs into one problem: there is no crane where the glass goes. Lobby curtain walls, office glass partitions and shopfronts are all places a crane cannot reach, and carrying the pane with hand suction cups takes four to six people and risks breaking the glass.

FullSharp will soon offer the FS-GVLR400 electric glass vacuum lifter cart for exactly this job. It drives on battery power, holds the pane with four vacuum pads, lifts it up to 3.38 m, then flips, rotates and shifts it into the frame. One operator with the controller is enough; the rest of the crew guides the pane and seals it.

It suits glazing contractors, glass processors loading and unloading racks, and interior fit-out teams installing large glass walls and doors. Other equipment for this work is in glass panel lifting for installation.

Five movements at the pad head

FS-GVLR400 electric glass lifter cart holding a glass pane with four vacuum pads

FS-GVLR400 electric glass lifter cart holding a glass pane with four vacuum pads

The main boom lifts electro-hydraulically and the forearm telescopes another 550 mm. At the boom head the pad frame flips 0–180° and rotates 360° continuously by motor, shifts sideways ±50 mm by motor, and tilts 90° to either side by hand.

With these five movements the crew can pick a pane lying on a rack or standing up, flip it upright, turn it the right way and push it into the frame. The ±50 mm shift matters most at the end: you adjust the last few millimetres without moving a 900 kg machine.

Load vs. reach: 400 kg close in, 230 kg at full reach

Load chart of the 400 kg glass lifter by height and reach

Load chart of the 400 kg glass lifter by height and reach

As with any boom, capacity drops as the reach grows. The chart gives 400 kg with the pane centre about 0.88 m from the cart and 230 kg at 1.43 m. The pad frame reaches up to 3.38 m.

When we survey a job we ask for three numbers: the pane weight, the height of the top of the frame, and the distance from where the cart can stand to the glazing line. Those three tell us whether the cart can do it.

All-day battery, detachable head for elevators

FS-GVLR400 dimensions: 2,889 mm long with the boom out, folded 1,249 x 815 x 1,349 mm

FS-GVLR400 dimensions: 2,889 mm long with the boom out, folded 1,249 x 815 x 1,349 mm

The cart has a 24V rear-wheel drive, 750 W as standard and 1.5 kW as an option, up to 4.2 km/h unladen and 15% gradeability. Two 12V 115Ah batteries give 12–18 hours of work depending on duty, and it charges from any 110–240V outlet on site.

The suction head is detachable. Folded, the cart is 1,249 x 815 x 1,349 mm and fits standard passenger elevators. It weighs 900 kg, so check the elevator and floor capacity first.

Safety

  • Dual pump, dual circuit vacuum system: if one circuit fails, the other still holds the pane.
  • Buzzer on low vacuum, with both digital and mechanical gauges.
  • Low-battery alarm, charging protection, overload alarm and emergency stop.
  • Wired remote keeps the operator away from the glass while lifting and flipping.

FS-GVLR400 specifications

ItemSpecification
Max. load400 kg
Max. working height3.38 m
Load vs. reach400 kg at 0.88 m; 230 kg at 1.43 m
Vacuum pads4 x Ø300 mm
Vacuum systemDual pump, dual circuit
Vacuum warningBuzzer, digital and mechanical gauges
Forearm telescopic stroke550 mm
Pad frame flip0–180°, electric
Pad frame rotation360° continuous, electric
Frame lateral shift±50 mm, electric
Side tilt90° each side, manual
Travel drive24V rear-wheel drive, 750 W (1.5 kW optional)
Unladen travel speed0–4.2 km/h
Gradeability15%
Battery2 x 12V 115Ah
ChargingAC 110–240V
Runtime12–18 h
Folded size1,249 x 815 x 1,349 mm
Machine weight900 kg

Availability

The cart is about to go on sale and FullSharp is taking enquiries and pre-orders now. Send us the pane size and thickness, installation height and a site layout photo, and we will check the load at your reach and quote when stock arrives.

Frequently asked questions

How heavy a glass pane can the electric glass lifter handle?

Up to 400 kg with the pane centre about 0.88 m from the cart. At 1.43 m reach the limit is 230 kg, so the distance to the glazing line matters.

How high can the glass lifter cart install glass?

The pad frame reaches 3.38 m, enough for glass walls, doors and ground or mezzanine floor facades.

Can the cart go up in an elevator?

Yes. The suction head is detachable and the cart folds to 1,249 x 815 x 1,349 mm. It weighs 900 kg, so check the elevator and floor capacity first.

How long does one charge last?

Two 12V 115Ah batteries give 12–18 hours depending on duty, charged from 110–240V.

When will the FS-GVLR400 be available?

It is about to go on sale. You can send an enquiry or pre-order now and FullSharp will quote when stock arrives.

Send us the pane size and thickness, installation height and a site photo, and FullSharp will check the load at your reach and hold a pre-order for you.