This 400 kg semi-automatic mini crane project covers two FS-400-BZD units for a fabrication workshop. They lift parts, sub-assemblies, motors and materials at machines the overhead crane cannot reach, or where waiting for the overhead crane slows the job down.
Unlike the standard version, both units have a Taiwan-made electric winch with a load limiter at the boom head. If the load is heavier than allowed, the winch simply will not pull the rope up, so the operator cannot overload the crane by mistake.
Two FS-400-BZD semi-automatic mini cranes, 400 kg, with a load-limiting winch at the boom head
The winch decides how safe a mini crane is. The one on this project is made in Taiwan: 500 kg rated, 6.35 mm galvanized steel rope 12 m long, 300 W motor on DC 12V or 24V, lifting speed 3 m/min (12V) or 4 m/min (24V).
A mechanical ratchet brake holds as soon as the button is released and locks if power is lost, so the load does not creep down on a weak battery. The load limiter blocks lifting when the load is too heavy, protecting the boom and the people around it.
One person pushes the crane to the machine, lifts a 300–400 kg assembly and moves on.
The load-limiting winch stops the lift when the load is too heavy, so the crane does not tip or bend its boom.
940 mm wide and 1,820 mm high when folded, it passes doors and aisles between machines.
At the shortest reach it lifts 400 kg; with the boom fully out (about 1,450 mm) the maximum load drops to 300 kg.
When the load is over capacity, the winch will not pull the rope up. The operator must reduce the load or shorten the boom before lifting again.
The 12V 120Ah battery runs about 4.5 hours continuously and takes about 8 hours to charge, so an overnight charge covers one shift.
See the 400 kg mini crane FS-400-BZD, all semi-automatic mini cranes from 400 to 1,000 kg, other semi-automatic mini crane projects and how to choose a mini crane from 400 kg to 2 tons. Send us the load weight, reach and aisle width and FullSharp will recommend the right model.