In-stock 200 kg Pneumatic Jib Crane, Competitive Price

This customer has a dedicated welding room with white panel walls, an epoxy floor and a perforated fixture welding table in the middle. Parts going onto the table weigh from a few dozen kilos up to nearly two hundred, and used to take two people to carry or a wait for the forklift. They wanted a lifting solution right inside the room, but without running new power cables into an area full of welding sparks.

FullSharp installed an in-stock pneumatic jib crane rated at 200 kg. The yellow steel column is bolted to the floor in a corner of the room and was cut to the exact ceiling height, so the boom sits just under the ceiling frame without touching the lights. The aluminum boom reaches across the whole welding table, and the 200 kg rating is marked on it.

Everything runs on compressed air taken from the plant's existing air line. The filter regulator is mounted on the column, the air hose runs along the boom on hanging loops and drops to the pneumatic hoist through a coiled section. The welder stands at the table, pulls the hook to the part, lifts it, swings the boom and sets it down exactly on the fixture, all by one person.

In-stock 200 kg pneumatic jib crane lifting solution at a competitive price

FullSharp 200 kg pneumatic jib crane in the corner of a welding room, with the boom covering the whole fixture table.

Installed equipment

Yellow steel column: ribbed base plate bolted to the floor; column length cut to the welding room ceiling.
Aluminum boom: light and smooth-swinging around the column, with a trolley that brings the hook to any point on the table.
Pneumatic hoist and hook: air-powered lifting with a coiled hose following the hook; the hook can be swapped for a gripper or vacuum lifter when needed.
Air filter regulator: mounted on the column and fed from the plant's existing air line.

Key specifications

Rated load200 kg
PowerCompressed air, no electricity
Column heightCut to ceiling height
AvailabilityIn stock
DeliveryWithin 2 weeks
InstallationWithin 1 day
ApplicationLifting parts onto a welding fixture table

Benefits of a pneumatic jib crane

No power cables

Only compressed air is needed, so there are no cables or panels near the welding sparks.

In stock, quick to install

Column cut to the ceiling, delivery within 2 weeks and installation in 1 day, with almost no disruption to production.

Competitive price

A standard 200 kg configuration with no custom design keeps the investment low.

Frequently asked questions

Does a pneumatic jib crane need electricity?

No. It runs entirely on compressed air and simply connects to the plant's existing air line.

Can it be installed under a low ceiling?

Yes. The column is cut to the exact ceiling height before delivery; in this welding room the boom sits right under the ceiling frame.

How soon can it be delivered?

It is an in-stock item, delivered in about 2 weeks and installed in 1 day.

See also FullSharp pneumatic jib cranes and installed pneumatic jib crane projects. Send FullSharp your ceiling height, required reach, the load and its maximum weight for a free survey and quotation.