Vacuum Lifter Component
Cutting-edge design and performance: explore the latest bikes on the scene
Categories
- Air Balancer18 products
- Baggage Handling3 products
- Cantilever Jib Crane10 products
- Crane Component14 products
- Electric Tow Tracker2 products
- Glass Handling – Production7 products
- Glass Handling – Installation19 products
- Industrial Manipulator20 products
- Light Crane Systems13 products
- Mini Crane5 products
- Roll Lifter4 products
- Servo Balancer / Intelligent Lifting Device (ILD)93 products
- Smart Lifter20 products
- Vacuum Cup26 products
- Vacuum Lifter40 products
- Vacuum Lifter Component131 products
- Vacuum Lifting Assembly18 products
- Vacuum Pump7 products
- Vacuum Tube System3 products
-
JB SERIES SINGLE-STAGE VACUUM PUMPS
ANVER JB Series vacuum pumps have no internal moving parts and run virtually maintenance-free on filtered dry air. Five nozzle sizes, 27 in. Hg, NPT or BSPP.
-
JTSED ELECTRONIC VACUUM SWITCH WITH DIGITAL READOUT
Electronic vacuum switch with a 3½-digit LED display that converts vacuum level into digital output for PLC systems, with two PNP open collector outputs, adjustable hysteresis and settings in psi, bar or in. Hg
-
JTSED-W ELECTRONIC VACUUM SWITCH WITH DIGITAL READOUT
Compact electronic vacuum switch with a 2-digit kPa display and one PNP normally closed output, powered from 10.8 to 26.4 V DC, with M5 female and G 1/8″ male air connection and a 1.5 m grommet lead wire
-
JTZSE4 DIGITAL CONTROL SWITCH
Compact digital vacuum and pressure control switch for non-corrosive gases over 0 to -101.3 kPa, with a 3½-digit red LED and analog bar display, two PNP comparative outputs, 1-5V analog output and four selectable operating modes
-
JV SERIES MINI COMPRESSED AIR VENTURI VACUUM GENERATORS
ANVER JV Series mini vacuum generators weigh 16 grams and pull 26 in. Hg with no moving parts. Mount at the cup for faster response and lower air use.
-
LARGE CAPACITY FOAM VACUUM PAD ATTACHMENTS
ANVER FPAHD foam pad attachments lift concrete and rough stone from a single pad, 1,900 to 9,000 lb, where the load surface rules out multiple smaller pads.
-
LARGE RECTANGULAR VACUUM PADS FOR EXTRA-HEAVY LOADS
ANVER large rectangular vacuum pads lift 2,800 to 3,200 lb on a single pad, for heavy compact loads with too little surface for several smaller pads.
-
LBA-SERIES LIFTING BAIL ASSEMBLIES
Lifting bail assemblies that allow the vacuum generator to be mounted remotely while using ANVER lifting frames and pad attachments, with 2200 lb structural capacity, 8 in. headroom and an automatic attach-and-release cycle triggered by a slack suspension chain
-
LEVEL COMPENSATOR MOUNTING BRACKETS FOR ALUMINIUM EXTRUSIONS
ANVER SLSA brackets drop a spring level compensator straight into an aluminium extrusion, so a vacuum cup EOAT costs two bolt clamps and a bracket to build.
-
MECHANICAL VACUUM GENERATORS
Self-powered, self-cycling mechanical vacuum generators that create vacuum from the hoist up and down movement, with no electricity or compressed air required — models from 1100 lb to 18,000 lb capacity, rated for 100% duty cycle 24 hour operation
-
METAL EXHAUST MUFFLERS
ANVER ES Series metal exhaust mufflers, 1/4″ to 1″ NPT, rated to 250 psi. Cut vacuum pump exhaust noise without restricting flow or pump performance.
-
MG Handle | Lifts All Curved Dual-Grip Control Handle
Lifts All MG handle gives maximum control with a dual grip that also reduces pinching. Curved for easy shelf placement. 100–1031 mm, stainless steel available.
-
MGS Handle | Lifts All Two-Handed Steel Control Handle
Lifts All MGS handle gives optimal control with an ergonomic two-handed grip. Steel construction for demanding environments, 100–700 mm, tilt available.
-
MINIATURE VACUUM BALL VALVES
ANVER miniature two-way ball valves, 1/8″ to 1/2″ NPT. Chrome-plated brass with Teflon ball seat, rated 250 psi and 29″ Hg for manual ON/OFF vacuum control.
-
MITEY-AIRVAC AIR POWERED VACUUM STATIONS
ANVER Mitey-AirVac stations hold vacuum if air pressure is lost, per ASME B30.20, so the load can be set down safely. Subcompact, maintenance-free, 24 in. Hg.
-
MOTOR STARTERS AND PROTECTORS
ANVER motor starters combine short circuit protection, overload protection and switching in one unit — 0.1 to 25 FLA, with enclosure. Transformers also listed.
Sign up & Receive a 20% Off Coupon From eRide!
Receive updates, access to exclusive deals, and more.
$20 Coupon can only be used on whole unit products, not accessories or parts