Vacuum Lifter Component

CLAMP-P ADJUSTABLE PLASTIC COMPONENT MOUNTS

ANVER CLAMP-P plastic snap clamps for 0.77″ to 2.50″ components — mount transfer tubes, air movers and mufflers with no tools. Seven sizes plus accessories.

Vacuum Lifter Component

COMPACT PLASTIC EXHAUST MUFFLERS

ANVER compact plastic exhaust mufflers JMU17–JMU26, G 1/8″ to G 1/2″. Nylon housing, polyethylene element, 68 dB(A), supplied on single stage vacuum pumps.

Vacuum Cup

CVM SERIES SUCTION CUPS

CVM-equivalent suction cups match the original geometry and specification exactly. Flat, short bellows, bellows and multi-bellows, at a better price.

Vacuum Lifter Component

DIGITAL VACUUM / PRESSURE CONTROL SWITCH

Compact digital vacuum and pressure control switch for non-corrosive gases, with a 3-digit red LED display, two NPN switch outputs plus 1-5V analog output, six selectable pressure units and a 30 mm square IP40 body

Vacuum Lifter Component

DIGITAL VACUUM / PRESSURE CONTROL SWITCHES

Digital vacuum and pressure control switches with IP65 body, 3-digit red LED display, 2-point NPN/PNP output plus 1-5V analog and eight selectable pressure units — JTZSE for non-corrosive gases, JTZSE-R2 with SUS316L pressure ports for liquids or gases

Vacuum Lifter Component

EASY ADJUSTABLE VACUUM RELIEF VALVES

Externally adjustable vacuum relief valves in anodized aluminum, 1″ to 2″ NPT male, adjustable from 6 to 21 in. Hg, that bleed cooling air into blower vacuum pumps to prevent dead-head overheating

Vacuum Lifter Component

ELECTRIC SOLENOID AIR VALVES

Electrically operated 3/2 seat valves for vacuum and compressed air, 24V DC, in three body styles — manifold mount, body ported and G 1/8 male output — with 0.8, 1.6 or 2.3 mm nominal diameter and a rated life of 100 million cycles

Vacuum Lifter Component

ELECTRIC VACUUM SWITCHES AND PRESSURE SENSORS

Heavy-duty vacuum and pressure switch with a 0 to 30 inHg range and SPDT output, rated 15 amps at 125/250/480 Vac, in a NEMA 1 enclosure with a shroud over the internal wires and an easily accessible calibration dial

Vacuum Lifter Component

ELECTRIC VACUUM SWITCHES WITH NO/NC SPADE TERMINALS

Adjustable electric vacuum switches with NO/NC spade terminals, available in 0-15 in. Hg or 15-30 in. Hg range, rated 10A AC at 125/250 VAC, with threaded vacuum ports on both ends

Vacuum Lifter Component

ELECTRONIC VACUUM SWITCH (JTSE)

Electronic vacuum switch that converts vacuum level into digital output for PLC systems and 1-5V analog output for on/off control over a 0 to 29.5″ Hg range, with PNP open collector output and adjustable hysteresis

Vacuum Lifter Component

EP SERIES COMPACT ELECTRIC POWERED MINI-VACUUM STATIONS

ANVER EP Series electric vacuum stations run on 115 V mains, so no air line is required. The pump runs continuously, handling slightly porous material well.

Vacuum Lifter Component

Expanders | Lifts All Core Grippers for the Roll Gripper

Lifts All expanders grip the roll core and expand, lifting rolls up to 120 kg. 92-10061 for 76 mm cores, 92-10062 for 152 mm cores.

Vacuum Lifter Component

Extension Handle | Lifts All Extended Handle with Tilt

Lifts All extension handle in lengths from 100 to 700 mm, fitting several standard lifting tools. The tilt version suits roll lifting. Stainless steel available.

Vacuum Lifter Component

Flow-Through Silencers

ANVER FTS Series flow-through silencers, G 1/8 to G 1-1/2 BSPP. Debris passes straight through so venturi pumps stay quiet without clogging. 150 PSI max.