Vacuum Lifting Assembly
Cutting-edge design and performance: explore the latest bikes on the scene
Categories
- Air Balancer18 products
- Baggage Handling3 products
- Cantilever Jib Crane10 products
- Crane Component14 products
- Electric Tow Tracker2 products
- Glass Handling – Production7 products
- Glass Handling – Installation19 products
- Industrial Manipulator20 products
- Light Crane Systems13 products
- Mini Crane5 products
- Roll Lifter4 products
- Servo Balancer / Intelligent Lifting Device (ILD)93 products
- Smart Lifter20 products
- Vacuum Cup26 products
- Vacuum Lifter40 products
- Vacuum Lifter Component131 products
- Vacuum Lifting Assembly18 products
- Vacuum Pump7 products
- Vacuum Tube System3 products
-
BAE1-GEN3 SERIES VACUUM STATIONS
Self-contained battery powered vacuum stations with the ANVER Vacuum Control Module, load sensing lifting bail with safety lock-out and dual 2.5 CFM diaphragm pumps on a 12 volt 79 amp hour deep-cycle battery — up to 8 hours of continual operation, rated to 4600 lb
-
BAE3-GEN3 SERIES VACUUM STATIONS
Heavy production self-contained battery powered vacuum stations with three diaphragm pumps totalling 7.5 CFM, a 5.4 gallon vacuum reservoir and the ANVER Vacuum Control Module with load sensing safety lock-out — five frame models from 2300 lb to 10,000 lb plus remote and tilter versions
-
GF-10TSERIES HEAVY DUTY VACUUM GENERATOR LIFTING FRAMES
Heavy duty vacuum generator lifting frames rated 10 ton (9072 kg), with 30 to 33 gallon reservoirs and motors from 1 to 5 HP for near-instant attach, with Vac-Packs that can be swapped in minutes — combined lifter capacity and weight must not exceed 22,500 lb
-
GF-15TSERIES HEAVY DUTY VACUUM GENERATOR LIFTING FRAMES
Heavy duty vacuum generator lifting frames rated 15 ton (13,608 kg), with a 30 gallon reservoir and motors from 1 to 5 HP for near-instant attach, available with battery or electric Vac-Packs that can be swapped in minutes
-
GF-5TSERIES HEAVY DUTY VACUUM GENERATOR LIFTING FRAMES
Heavy duty vacuum generator lifting frames rated 5 ton (4536 kg), with a large 7.6 to 11 gallon reservoir for near-instant attach and added safety on power failure, available with electric or battery Vac-Packs that can be swapped in minutes
-
H-Frames | Lifts All Vacuum Frames for Cartons
Lifts All H-frames grip the four corners of the package, avoiding the taped joint. For porous and dense loads, 4 or 6 cups, up to 100 kg.
-
LBA-SERIES LIFTING BAIL ASSEMBLIES
Lifting bail assemblies that allow the vacuum generator to be mounted remotely while using ANVER lifting frames and pad attachments, with 2200 lb structural capacity, 8 in. headroom and an automatic attach-and-release cycle triggered by a slack suspension chain
-
MECHANICAL VACUUM GENERATORS
Self-powered, self-cycling mechanical vacuum generators that create vacuum from the hoist up and down movement, with no electricity or compressed air required — models from 1100 lb to 18,000 lb capacity, rated for 100% duty cycle 24 hour operation
-
VPE1-GEN3 SERIES VACUUM STATIONS
Self-contained electric vacuum stations with the ANVER Vacuum Control Module, load sensing lifting bail with safety lock-out, 627 cu in vacuum reservoir and oil-less dry piston pump — rated up to 4600 lb, with four control styles including electric self-cycling
-
VPE3-GEN3 SERIES VACUUM STATIONS
Heavy production self-contained electric vacuum stations with two oil-less dry piston pumps, a 5.4 gallon vacuum reservoir and the ANVER Vacuum Control Module with load sensing safety lock-out — five frame models from 2300 lb to 10,000 lb plus remote and tilter versions
-
VPF-57-AC SERIES VACUUM STATIONS
Self-contained electric powered vacuum stations with a fully welded frame, integral vacuum reservoir and lifting bail, rated 2200 lb on 3×3 beams or 4400 lb on reinforced 3×6 beams, with digital front gauges, Energy Saver shut-off and dual accessible filters
-
VPF-57-ACP SERIES VACUUM STATIONS
Corded self-contained electric vacuum stations with a solid-state Vacuum Control Module, digital front gauges and a choice of radio transmitter with safety interlock or plug-in pendant control, rated 2200 lb on 3×3 beams or 4400 lb on reinforced 3×6 beams
-
VPF-57-AIR SERIES VACUUM STATIONS
Self-contained compressed air powered vacuum stations with a fully welded frame, integral vacuum reservoir and lifting bail, rated 2200 lb on 3×3 beams or 4400 lb on 3×6 beams, with Energy Saver shut-off, dual front gauges and vacuum leakage sensor
-
VPF-57-DCP SERIES VACUUM STATIONS
Self-contained battery powered vacuum stations with a rechargeable 12 volt 12 amp hour AGM battery for a full 8 hour shift, solid-state control module, battery charge gauge with hour meter and a choice of radio or pendant control — for use where AC power is not available
-
VPFL4-AC SERIES VACUUM GENERATORS
Low headroom electric powered vacuum generators with a 1/2 HP vacuum pump reaching 24″ Hg, Energy Saver shut-off, dual accessible filters, check valve and vacuum leakage sensor — 2200 lb structural capacity in 115V or 220-240V versions
-
VPFL4-AIR SERIES VACUUM GENERATORS
Low headroom compressed air powered vacuum generators with 2200 lb structural capacity, single stage venturi with no moving parts, front mounted vacuum gauge, slide control valve with push-button safety lock, check valve with reservoir and vacuum leakage sensor
Sign up & Receive a 20% Off Coupon From eRide!
Receive updates, access to exclusive deals, and more.
$20 Coupon can only be used on whole unit products, not accessories or parts