Vacuum Lifter Component
Cutting-edge design and performance: explore the latest bikes on the scene
Categories
- Air Balancer18 products
- Baggage Handling3 products
- Cantilever Jib Crane10 products
- Crane Component14 products
- Electric Tow Tracker2 products
- Glass Handling – Production7 products
- Glass Handling – Installation19 products
- Industrial Manipulator20 products
- Light Crane Systems13 products
- Mini Crane5 products
- Roll Lifter4 products
- Servo Balancer / Intelligent Lifting Device (ILD)93 products
- Smart Lifter20 products
- Vacuum Cup26 products
- Vacuum Lifter40 products
- Vacuum Lifter Component131 products
- Vacuum Lifting Assembly18 products
- Vacuum Pump7 products
- Vacuum Tube System3 products
-
ADJUSTABLE BRACKETS FOR SUSPENSION RODS
ANVER SBA slide brackets mount vacuum cup suspensions on 1-1/4, 1-1/2, 1-3/4 and 2 in. square crossarms, and slide along the beam to any cup position.
-
ADJUSTABLE MINIATURE VACUUM RELIEF VALVES
Adjustable miniature vacuum relief valves in 1/2″ and 3/4″ thread sizes, cracking level adjustable from 6″ Hg to 27″ Hg with a locking jam nut, spring loaded to operate in any position
-
AIR MOVER STYLE VACUUM PUMPS – FT FLOW TUBES & TT TRANSFER TUBES
ANVER air movers give very high flow at low vacuum, for porous loads and material transfer. FT flow tubes amplify air up to 16:1; TT tubes convey inline.
-
AL SERIES COMPACT AIR POWERED MINI-VACUUM STATIONS
ANVER AL Series mini-vacuum stations hold vacuum on power failure and, with Air Saver, use no compressed air at all while holding a non-porous load.
-
AP SERIES AIR POWERED VAC-PACK STATIONS
ANVER AP Series air powered vacuum stations: 27 in. Hg, 10/20/30 gallon reservoir, pneumatic energy saver shuts the air off at vacuum. No electricity needed.
-
BAE1-GEN3 SERIES VACUUM STATIONS
Self-contained battery powered vacuum stations with the ANVER Vacuum Control Module, load sensing lifting bail with safety lock-out and dual 2.5 CFM diaphragm pumps on a 12 volt 79 amp hour deep-cycle battery — up to 8 hours of continual operation, rated to 4600 lb
-
BAE10 SERIES BATTERY POWERED VAC-PACK VACUUM STATIONS
ANVER BAE10-17 battery powered Vac-Pack vacuum station: 12 VDC rotary vane pump, 17 CFM, 24 in. Hg. No air line, no mains cord. Radio or pendant control.
-
BAE3-GEN3 SERIES VACUUM STATIONS
Heavy production self-contained battery powered vacuum stations with three diaphragm pumps totalling 7.5 CFM, a 5.4 gallon vacuum reservoir and the ANVER Vacuum Control Module with load sensing safety lock-out — five frame models from 2300 lb to 10,000 lb plus remote and tilter versions
-
BAG HEAD VACUUM PAD ATTACHMENTS
ANVER bag head attachments lift sacks and bags on vacuum tube lifters, robot end effectors and pick and place machines. Stainless or plastic, three sizes.
-
Ball Joint | Lifts All Rotating Joint with Adjustable Angle
Lifts All ball joint lets the vacuum base tilt 15 degrees and rotate indefinitely — for uneven loads and uneven gripping surfaces. Article 93-10012.
-
Basic Bottle Gripper | Lifts All — 24 Bottles in One Lift
Lifts All bottle gripper lifts 24 longneck bottles at once. Manual or automatic clamping, endless rotation. For breweries and the beverage industry.
-
Bike Steering | Lifts All Two-Handed Ergonomic Handle
Lifts All Bike Steering handle uses a bicycle-handlebar design for a natural two-handed grip. Better control, even force, less wrist strain. 100–700 mm.
-
Bull Horn | Lifts All Vertical Grip Control Handle
Lifts All Bull Horn handle uses a vertical hand grip for more control and stability, keeping the arms close to the body. 100–700 mm, stainless steel available.
-
C-CV-CK SERIES SINGLE-STAGE VACUUM GENERATORS
Single-stage venturi vacuum generators with an integrated mechanical vacuum switch adjustable from 6″ to 16″ Hg, in a machined aluminum body with brass nozzles — eight models from 0.46 to 6.36 SCFM air consumption
-
C-VF SERIES METAL VACUUM FILTERS
ANVER C-VF Series metal vacuum filters: 120 or 130 micron, aluminium housing, replaceable elements. G 1/8″ to G 3/8″, 0 to −960 mbar, for automation equipment.
-
CHECK VALVES FOR VACUUM SYSTEMS
Welded steel vacuum reservoir, 100 cubic inches (1639 cc), 3/8-NPT port, safety-yellow powder coat, used inline for power-failure safety or as an auxiliary tank for faster attach
Sign up & Receive a 20% Off Coupon From eRide!
Receive updates, access to exclusive deals, and more.
$20 Coupon can only be used on whole unit products, not accessories or parts