DIGITAL VACUUM / PRESSURE CONTROL SWITCH

Compact digital vacuum and pressure control switch for non-corrosive gases, with a 3-digit red LED display, two NPN switch outputs plus 1-5V analog output, six selectable pressure units and a 30 mm square IP40 body

Description

DIGITAL VACUUM / PRESSURE CONTROL SWITCH

Model AVES-01 digital control switch

Product Overview

ANVER AVES-01 digital vacuum switch

AVES-01

Model AVES-01 Digital Control Switch for non-corrosive gases. This popular model used for non-corrosive gases [compound and low pressure] is a compact multi-purpose compound pressure gauge, specifically designed to cover negative-to-normal pressure. A rear mount bracket option is available.

Features

Display

  • Full 3-digit red LED display – gives a clear indication even in low light locations
  • 6 different pressure units are available for selection

Output

  • 2 NPN switch output with multiple operation modes possible
  • Analog output 1–5V in addition to the 2 NPN switch output

Body

  • Proven IP40 grade gauge body is suitable for industrial installations
  • Small, space-saving 30 mm square face design

Digital Vacuum / Pressure Control Switch Specifications

Model number Pressure port Item weight [oz. (grams)] including 2 m cable Optional accessories
ANVER AVES-01AVES-01 Plastic 1/8 female outside, 5 m inside 94 (3.316) ANVER AVES-01-BRACKETAVES-01-BRACKET

Optional accessory: panel mounting bracket, P/N AVES-01-BRACKET.

Pressure Reference – Gauge Pressure Setting Range

Model number Rated pressure range kPa gf/cm² In. Hg (mm Hg) mbar psi Breakdown pressure
AVES-01 -100 to 1000 kPa -999 to 999 -999 to 999 0 to 29.9 (0 to 760) n/a -14.5 to 14.5 500 kPa

Switch Output

Model number General specifications Hysteresis Repeatability Response* Short circuit protection
AVES-01 2-point output, NPN transistor open collector. Capacity: 30 VDC 100 mA max. Adjustable ±0.2% F.S. ±1 digit 1 ms maximum
(Program 2.0 50, 100, 250, 500 ms)
Provided

* Please refer to “Models Explanation”.
** Output mode setting (detected pressure – Pin) refer to “Programming”.

Environmental Characteristics

Model number Protection grade Operating temp. range Storage temp. range Operating humidity
AVES-01 IP40 (pressure gauge body): conforming to IEC 32° to 122°F (0° to 50°C) 32° to 122°F (0° to 50°C) 35 to 85% relative humidity

General

Model number Analog output Display Negative pressure display Switch state indication
AVES-01 Output voltage: 1–5 V
Output impedance: 10k ohm
Resolution: 1/204
Full 3 digit LED (sampling cycle: 4/second) Negative pressure LED is on Output 1 (green) and output 2 (red) light up when output is on: thermal error

AVES-01 dimensional drawing

Reviews

There are no reviews yet.

Be the first to review “DIGITAL VACUUM / PRESSURE CONTROL SWITCH”

Your email address will not be published. Required fields are marked *