Description
GF-SERIES HEAVY DUTY VACUUM GENERATOR LIFTING FRAMES
Electric powered vacuum generator lifting frames – 10 ton (9072 kg)
Product Overview
Generator shown with ESC electric self-cycling control
The GF Series generators incorporate the latest in sophisticated lifting technology for the handling industry, increasing speed, productivity and efficiency. Available in electric and battery powered. Vac-Packs can be replaced in minutes to minimize downtime in case of service. The GF-Series speeds production due to a large reservoir allowing the lifter to attach almost instantly, decreasing attach time. The large reservoir not only increases efficiency but also increases safety in the case of power failure due to the vacuum that remains in the system.
Features
- State-of-the-art Vacuum Control which minimizes vacuum pump use greatly increasing number of hours between servicing
- Dual redundancy safety lock-out lifting bail that requires operator to first set the unit down before they release the load
- Front control panel and gauges
- Indicator lights
- Vacuum retention
- Thermal overload protection
- Ergonomic adjustable front handlebar
- Audible vacuum leakage warning system
For electrical power requirements refer to individual vacuum generator series pages (see table below).
NOTE: Maximum lifter capacity and lifter weight combined cannot exceed 22,500 lb (10,205 kg).
Your Choice of Four Control Styles
Standard controls
Electric self-cycling attach/release
Instant attach/release is provided via the hoist up and down movement. The attach and release alternate each lift cycle for fast, efficient handling. Similar to our line of mechanical generators.
- No pendant or radio controls required for attach/release
- Extremely safe – load cannot be released until it is set down on a surface
- Simple to operate
Radio controlled 3 button attach / release / interlock transmitter with plug-in receiver
Hand held device with attach, release and safety interlock push buttons with holster mounted on front handlebar. Plug-in receiver is mounted on side of vacuum generator. Contact factory for more information.
- Radio control transmitter and mounting holster
- Radio control receiver and mounting bracket
Optional controls
Plug-in attach / release / interlock control pendant
Attach/release momentary switch and safety interlock push-button located on control pendant with 10 ft long coiled cord.
- Pendant control and mounting holster
- Plug-in, replaceable coil cord, 10 ft long
Plug-in harness, customer radio receiver interface
Control harness allows you to wire your own radio receiver for integration of attach / release / interlock.
- Cord, 3 ft long
Specifications
| Generator series model no. | GF10TB10-17 | GF10T3 | GF10T24 | GF10T48 | GF10T75 |
|---|---|---|---|---|---|
| Vacuum generator series | BAE10-17 | VPE3-GEN2 | VPEHE24 | VPEHE48 | VPEHE75 |
| Motor [HP] | 1 | 2x 3/4 | 1.5 | 3 | 5 |
| Vacuum pump [SCFM] | 17 | 2x 8 | 24 | 50 | 78 |
| Unit weight [lb (kg)] | 978 (444) | 837 (380) | 730 (332) | 932 (423) | 1050 (477) |
| Vacuum level at sea level [in. Hg (mmHg)] | 24 | 24 | 24 | 24 | 24 |
| Reservoir size [gallon (L)] | 30 (114) | 33 (126) | 30 (114) | 30 (114) | 30 (114) |
| Energy saver / quiet automatic shut-off | YES | YES | YES | YES | YES |
Optional Controls
| Part number | Description |
|---|---|
| RCPK-ARI |
Radio control kit for Vac-Packs, attach/release/interlock Kit includes: radio control transmitter and mounting holster, radio control receiver and mounting bracket |
| EPK-AC/DC-ARI |
Pendant control kit for Vac-Packs, attach/release/interlock Kit includes: pendant control and mounting holster, plug-in replaceable coil cord 10 ft long |
| 34000332 |
Plug-in harness, customer radio receiver interface Kit includes: cord, 3 ft long |
Recommended Spare Parts
| Part number | Description | Item weight [oz. (grams)] |
|---|---|---|
 34000152 |
Pendant coil cable replacement / extension, 10 ft long, plug-in | N/A |
 UB-125 |
Utility bar assembly for 1.25″ dia. handlebars (VPE3-GEN3 / BAE3-GEN3 / GF Series) | N/A |
 21301186 |
Radio control transmitter holster assembly, bolt-on for utility bar (mounting hardware included) | N/A |
 21301187 |
Pendant mounting bracket assembly, bolt-on for utility bar (mounting hardware included) | N/A |
 RCT-PCLIP |
Plastic belt clip for RCT transmitter | 0.441 (12.5) |
 RCT-MCLIP |
Metal belt clip for RCT transmitter | 0.758 (21.5) |
 RCT-SCREW |
Belt clip screw for RCT transmitter | 0.0004 (0.01) |
 RCT-NYLONCOVER |
Protective nylon cover for RCT transmitter | 1.111 (31.5) |
Reviews
There are no reviews yet.