Vacuum Lifter Component
Cutting-edge design and performance: explore the latest bikes on the scene
Categories
- Air Balancer18 products
- Baggage Handling3 products
- Cantilever Jib Crane10 products
- Crane Component14 products
- Electric Tow Tracker2 products
- Glass Handling – Production7 products
- Glass Handling – Installation19 products
- Industrial Manipulator20 products
- Light Crane Systems13 products
- Mini Crane5 products
- Roll Lifter4 products
- Servo Balancer / Intelligent Lifting Device (ILD)93 products
- Smart Lifter20 products
- Vacuum Cup26 products
- Vacuum Lifter40 products
- Vacuum Lifter Component131 products
- Vacuum Lifting Assembly18 products
- Vacuum Pump7 products
- Vacuum Tube System3 products
-
VACUUM TUBE SYSTEM HOSE CUFFS AND METAL HOSE BARBS
ANVER HPC hose cuffs and connectors plus galvanized, aluminum and polypropylene hose barbs from 3/4″ to 2½” NPT — airtight connections for high flow vacuum hose.
-
VC SERIES VACUUM CUPS
Centre suspension and vacuum port cups with a cleated non-skid face, in nitrile or high heat silicone, with NPT or metric G thread options.
-
VC57 / VC65 / VC75 VACUUM CUPS
ANVER hub style vacuum cups with rod suspension and side vacuum port. VC57 to VC95 rated 75 to 250 lb, plus VC95Q and VC119Q quad mount cups to 500 lb.
-
VLS VACUUM LEAKAGE SENSING SYSTEMS
Solid state vacuum leakage sensor for vacuum lifters and tilters. Monitors vacuum level and triggers a horn and flashing red LED if the pre-set percentage of vacuum is lost during a lift, with LCD readout and three independent power sources.
-
VP SERIES FLAT VACUUM CUPS WITH SLIP-ON SEALS
ANVER VP Series flat cups use replaceable slip-on SSR seals, so worn lips cost a seal instead of a cup. Eighteen sizes from 20 to 750 lb, ball swivel or quad.
-
VP SERIES LARGE VACUUM PADS WITH BOLT-ON SEALS
ANVER bolt-on vacuum pads handle metal sheet and plate from 750 to 2,300 lb. Steel clamping ring protects the seal, and worn seals bolt off and replace easily.
-
VPE1-GEN3 SERIES VACUUM STATIONS
Self-contained electric vacuum stations with the ANVER Vacuum Control Module, load sensing lifting bail with safety lock-out, 627 cu in vacuum reservoir and oil-less dry piston pump — rated up to 4600 lb, with four control styles including electric self-cycling
-
VPE3-GEN3 SERIES VACUUM STATIONS
Heavy production self-contained electric vacuum stations with two oil-less dry piston pumps, a 5.4 gallon vacuum reservoir and the ANVER Vacuum Control Module with load sensing safety lock-out — five frame models from 2300 lb to 10,000 lb plus remote and tilter versions
-
VPEHE SERIES ELECTRIC VAC-PACK VACUUM STATIONS
ANVER VPEHE electric Vac-Pack vacuum stations: 24, 50 and 78 SCFM, up to 26.5 in. Hg, 1″ NPT. Optional 30 gallon reservoir. 380V/3Ph/50Hz models available.
-
VPF-57-AC SERIES VACUUM STATIONS
Self-contained electric powered vacuum stations with a fully welded frame, integral vacuum reservoir and lifting bail, rated 2200 lb on 3×3 beams or 4400 lb on reinforced 3×6 beams, with digital front gauges, Energy Saver shut-off and dual accessible filters
-
VPF-57-ACP SERIES VACUUM STATIONS
Corded self-contained electric vacuum stations with a solid-state Vacuum Control Module, digital front gauges and a choice of radio transmitter with safety interlock or plug-in pendant control, rated 2200 lb on 3×3 beams or 4400 lb on reinforced 3×6 beams
-
VPF-57-AIR SERIES VACUUM STATIONS
Self-contained compressed air powered vacuum stations with a fully welded frame, integral vacuum reservoir and lifting bail, rated 2200 lb on 3×3 beams or 4400 lb on 3×6 beams, with Energy Saver shut-off, dual front gauges and vacuum leakage sensor
-
VPF-57-DCP SERIES VACUUM STATIONS
Self-contained battery powered vacuum stations with a rechargeable 12 volt 12 amp hour AGM battery for a full 8 hour shift, solid-state control module, battery charge gauge with hour meter and a choice of radio or pendant control — for use where AC power is not available
-
VPFL4-AC SERIES VACUUM GENERATORS
Low headroom electric powered vacuum generators with a 1/2 HP vacuum pump reaching 24″ Hg, Energy Saver shut-off, dual accessible filters, check valve and vacuum leakage sensor — 2200 lb structural capacity in 115V or 220-240V versions
-
VPFL4-AIR SERIES VACUUM GENERATORS
Low headroom compressed air powered vacuum generators with 2200 lb structural capacity, single stage venturi with no moving parts, front mounted vacuum gauge, slide control valve with push-button safety lock, check valve with reservoir and vacuum leakage sensor
-
VPFL4-AIR-T SERIES VACUUM GENERATORS
Compressed air powered vacuum generators with Energy Saver technology that shuts off air flow once the pre-set vacuum level is reached, plus dual air filters, check valve with reservoir and vacuum leakage sensor — 2200 lb structural capacity
Sign up & Receive a 20% Off Coupon From eRide!
Receive updates, access to exclusive deals, and more.
$20 Coupon can only be used on whole unit products, not accessories or parts