grip wheels
Cutting-edge design and performance: explore the latest lifters on the scene
Categories
- Air Balancer18 products
- Baggage Handling3 products
- Cantilever Jib Crane10 products
- Crane Component14 products
- Electric Tow Tracker2 products
- Glass Handling – Production7 products
- Glass Handling – Installation19 products
- Industrial Manipulator20 products
- Light Crane Systems13 products
- Mini Crane5 products
- Roll Lifter4 products
- Servo Balancer / Intelligent Lifting Device (ILD)93 products
- Smart Lifter20 products
- Vacuum Cup26 products
- Vacuum Lifter40 products
- Vacuum Lifter Component131 products
- Vacuum Lifting Assembly18 products
- Vacuum Pump7 products
- Vacuum Tube System3 products
-
VPF-57-DCP SERIES VACUUM STATIONS
Self-contained battery powered vacuum stations with a rechargeable 12 volt 12 amp hour AGM battery for a full 8 hour shift, solid-state control module, battery charge gauge with hour meter and a choice of radio or pendant control — for use where AC power is not available
-
VPFL4-AC SERIES VACUUM GENERATORS
Low headroom electric powered vacuum generators with a 1/2 HP vacuum pump reaching 24″ Hg, Energy Saver shut-off, dual accessible filters, check valve and vacuum leakage sensor — 2200 lb structural capacity in 115V or 220-240V versions
-
VPFL4-AIR SERIES VACUUM GENERATORS
Low headroom compressed air powered vacuum generators with 2200 lb structural capacity, single stage venturi with no moving parts, front mounted vacuum gauge, slide control valve with push-button safety lock, check valve with reservoir and vacuum leakage sensor
-
VPFL4-AIR-T SERIES VACUUM GENERATORS
Compressed air powered vacuum generators with Energy Saver technology that shuts off air flow once the pre-set vacuum level is reached, plus dual air filters, check valve with reservoir and vacuum leakage sensor — 2200 lb structural capacity
-
VPHA SERIES SUSPENSION ADAPTERS FOR VACUUM PADS
ANVER VPHA adapters let rigid mount and ball swivel vacuum pads work with your existing suspension. Groups 10 to 40, for M12, M20, M24 and M36 studs.
-
VPHF-SERIES HIGH FLOW VACUUM GENERATORS
High flow electric powered vacuum generators built only for porous materials such as plywood, OSB, particle board, cement board and drywall, with regenerative pumps up to 220 SCFM on 3 phase power and a 2950 lb structural frame rating
-
VR SERIES COMPRESSED AIR POWERED MINI VACUUM GENERATORS
ANVER VR Series mini vacuum pumps connect compressed air straight to the cup, creating vacuum at the load. 26 in. Hg, no moving parts, NPT or BSPP threads.
-
Wheel Gripper | Lifts All Mechanical Tire Lifter 62 kg
Lifts All wheel gripper holds the wheel while you mount it — a tire fitted in ten seconds. Rotates and tilts to the bolt holes, grip fingers adjust 600–840 mm.
-
Wilson-VAT
Wilson-VAT stainless steel lift and tip unit for food and pharma. Lifts and pours 60–100L mixing tanks at working heights to 3200mm. IP66, 304 stainless.
Sign up & Receive a 20% Off Coupon From eRide!
Receive updates, access to exclusive deals, and more.
$20 Coupon can only be used on whole unit products, not accessories or parts