Description
D-Series Servo Hoist
D-Series Servo Hoist
Series: KSH200DS / KSH400DS / KSH750DS / KSH1000DS
The Knight Global D-Series servo hoist carries the full feature set of the patented “Safety Drop Stop” (SDS) servo hoist, but without I/O – which brings the investment cost down substantially against the original SDS.
It is the safest, smartest and most economical powered servo hoist solution on the market. The D-Series keeps the full set of advanced programmable features, letting Knight Global compete directly with mid-range IADs without trading away safety.
*Note: The hoist requires the KLCA1030 Inline Control Handle. A graphite chain lubrication stick is built into the gearbox; replacement sticks can be ordered separately. Contact FULLSHARP for advice and a quotation.
D-Series Specifications
| Model Code | Capacity (lbs / kg) | Max Speed (fpm / mpm) | Voltage / Phase |
|---|---|---|---|
| KSH200DS-2401-005 | 200 lbs [90 kg] | 241 fpm [73.5 mpm] | 240V / 1 phase |
| KSH400DS-2401-005 | 400 lbs [181 kg] | 120 fpm [35.5 mpm] | 240V / 1 phase |
| KSH750DS-2401-005 | 750 lbs [340 kg] | 150 fpm [45.7 mpm] | 240V / 1 phase |
| KSH1000DS-2401-005 | 1000 lbs [453 kg] | 105 fpm [32 mpm] | 240V / 1 phase |
Features & Benefits
Mechanical
- Dual-chain design with redundant safety:
- Load chain: carries the working load.
- Safety chain: runs alongside as full redundancy.
- Lifting speed up to 241 ft/min [73.5 mpm].
- Maximum capacity up to 1,000 lbs [453 kg].
- 125% safety factor.
- Motor-holding brake.
- Patented Knight chain – outstanding service life.
- Integrated redundant chain guide.
- Two separate chain containers.
- Chain length: unlimited (12–18 ft / 3.6–5.5 m standard).
- Fully sealed worm-gear gearbox.
- H5 duty rating (continuous duty cycle).
- CE certified.
- Integrated graphite chain lubrication stick.
Software
- STO – Safe Torque Off.
- Enhanced user interface (UI).
- Ethernet connectivity as standard.
- Programming and diagnostic port.
- Virtual travel limits.
- Programmable speed reduction zones.
- Impact limiting.
- Active damping.
- Knight’s proprietary Float Mode.
- Programmable overload capability.
Electrical
- Industry 4.0 ready.
- Integrated illuminated Run-Stop button.
- Fast-responding enable trigger.
- 240 VAC, single phase, 50/60 Hz.
- Dual load sensing: payload and handle load.
- Green / blue LEDs – status indication.
- Red LED – fault indication, twist to reset.
Product Video
D-Series Servo Hoist – introduction by Yaskawa
Accessories
Servo Controls
KCA1033
KLCA1064
KLCA1058 / 1061
KLCA1059 / 1062
KLCA1060 / 1063
General Accessories
KSAA1003
KDSA1010 / 1011
KSAA1001 / 1002
KSAA1004
KSAA1007
KSAA1011
KSAD1022
KSAA1073 / 1075
Load Trolleys
KSAA1050
KSAA1059
KSAA1048
Power Cables
KCA1040
KCA1041
Made to order
Made to order
Disconnects
KCA1055
KCA1056
KCA1001
Technical Documents
Installation Guides
Downloading the Fault Log & KSP Instructions – Speed Hoist / D-Series Knight Rotary Union Guide
Reviews
There are no reviews yet.